Ericsson fwt w25 updates

Combining Ericsson's W25 FWT with the high-speed 3G mobile network allows a comparable broadband service to be deployed quickly and efficiently. However, if the 3G network is not available, the unit will conveniently and seamlessly switch to operating over the GSM network.

Got a news tip for our journalists? Share it with us anonymously here. Partner Content. Sponsored Whitepapers. Understanding the next security control points: applications and workloads. Best security practices after rapid Digital Transformation. How and why to backup your Office tenant.

Victoria Police's digital chief departs. CBA uses Technology division formation to reshuffle some tech leaders. From a web browser on the connected PC, the IP address default The User login page is displayed:.

The default User name is user and the default Password is user. After a successful login, the Overview page is displayed:. The possibility to change password using the Change Password button in the upper right corner.

The Configuration Wizard… button which is the entrance to the step-bystep configuration wizard recommended to use for first time settings. If an alarm occurs, the Alarm indicator on the front of the Ericsson W25 is red. This information among others is also found on the Internet and LAN web pages respectively. The WUI has an inactivity timeout set to 15 minutes.

Before this timeout expires, it is preceded by a notification displayed on top of the page one minute before the automatic logout:. When this timeout expires, the User login page is displayed with an information text about the automatic logout:.

Change Password To change the current password, click the Change Password button to display the Change Password page:. The current and new passwords are entered in the corresponding fields. The password is case sensitive and must be entered exactly as specified here distinguish between uppercase and lowercase letters. Events that generate an alarm are such that make it impossible to send or receive data, e. SIM card missing. If an alarm is detected, the Alarm indicator on the Ericsson W25 front panel is lit red , and the corresponding cause is displayed according to the table below: Table A new SIM card is required.

This information among others is also found on the Internet and LAN web pages respectively described in separate sections The signal quality affects the performance of the unit. If two or more bars are green, the connection is usually acceptable.

The mobile network currently used for the connection. The current state of the mobile network registration. In the Quick Installation Guide, the end-user is recommended to use this wizard for first time settings. The wizard can also be used for example if a reset to default configuration has been performed. Internet Access The first part of the wizard includes settings for Internet access. Depending on the current service setup, the requests for authentication may differ and only details provided by the service provider should be entered, leaving other fields blank.

An emergency call e. In this case, the button Unblock SIM is displayed. When entering a PUK code, the end-user has ten 10 attempts to give a correct key. If the service provider uses PPP as authentication method for Internet access, the supplied user name and password should be entered.

The WLAN interface is disabled by default to comply with national regulatory requirements, since the country code must be set before enabling the radio. Wireless devices are thoroughly regulated and the countries have slightly different regulations. Therefore, the region where the Ericsson W25 is used must be stated to make sure the correct radio frequencies are used when transmitting data.

SSID names are case sensitive and can contain up to 32 alphanumeric characters a-z, , -. If the checkbox is cleared the SSID will be hidden and in this case the SSID has to be provided manually to every wireless client where access is to be granted. Wireless security authentication and data encryption is used to restrict access to the wireless network.

Which authentication and encryption method that should be used depends on what is supported by the connected wireless client s. For WEP a private network key is needed. A bit data encryption key includes 10 characters. A bit data encryption key includes 26 characters.

Only the hexadecimal numbers and letters a-f are allowed. This network key must also be manually configured on each client in the wireless network. This pass phrase is case sensitive and consists of between 8 and 63 optional characters.

The pass phrase entered here must also be configured on the wireless client s. Wizard Confirmation The last page in the Configuration Wizard displays a summary of the settings configured on previous pages:.

The Previous button is used to return to previous pages and make changes. Cancel exits the wizard without saving any settings. The Finish button confirms the displayed settings and the Ericsson W25 automatically starts searching for a network. Internet The Internet web page includes status information and settings for the connection to the mobile network:. The following information is displayed regarding the connection to the mobile network: Table The data size and packet counters have the upper limits of 4 GiB and packets more than 4 billion packets.

When these limits are reached, the counters wrap around to zero. These settings are also included in the Configuration Wizard. Table The default IP address range The maximum lease time can be changed from the default seconds 2 hours. A valid value must be within the interval 60 seconds minimum to seconds maximum. The status for each port is either green Up or red Down. Region To ensure the Ericsson W25 operates on correct radio frequencies according to local regulations, the region where the Ericsson W25 is used must be stated.

Transmit Power [dBm] To avoid interference with other wireless networks, the transmit power level can be reduced. Scan for Wireless Networks To get information about adjacent wireless networks, the button Scan for wireless networks is used.

When the scanning is finished, a list is presented showing information about wireless clients that are nearby:.

If not, the name is hidden and has to be manually provided to wireless clients. It is important that the operating system and wireless LAN interface of the wireless client supports the selected authentication method. A bit data encryption key includes 10 characters and a bit encryption key includes 26 characters. The passphrase is case sensitive and consists of between 8 and 63 optional characters. Up to 20 clients can be added to the list.

The supported ALGs can be enabled and disabled individually. If multiple ports or port ranges are required, a new port entry for each port or port range must be added. Sharing The Sharing web page includes information about network sharing available through the USB ports. When an external hub is connected, the Ericsson W25 supports connection of up to two storage devices and one printer at the same time.

All devices in the local network that want to access a USB shared device or connected printer must belong to the same workgroup as the Ericsson W The name can be changed. If a Share name includes more than 12 characters or has embedded spaces, the share name will not be visible in Windows 95, 98 or ME clients. System The System web page includes system information and management functions used to update and restore the Ericsson W Basic System Information The upper part of the page displays basic system information about the Ericsson W Configuration Backup and Restore It is possible to save a backup copy of the current configuration and to restore a configuration from a previously stored backup file.

The configuration file must not be modified. All configuration changes should be made on the web pages. Restart A restart of the Ericsson W25 can be done by clicking the Restart button. A restart does not result in any configuration changes. Software Update New Ericsson W25 software versions can be either automatically or manually installed.

If there is a software image available for download the upgrade process is initiated. To manually check for new software versions, click the Check button.

Otherwise, information is displayed about how to initiate the software update. Installing new Software from File To install new software from a local file, use the Browse… button to locate the file. Factory Reset To reset the Ericsson W25 configuration to its factory default settings click the Reset button. If the WUI is not accessible, a reset to the default configuration can be done using the Reset button on the unit by following the steps below: 1. Disconnect the power cable or from the Ericsson W If the battery is used as power supply, disconnect the battery cable.

Each row in the list displays the time and date when an alarm occurred, the type of alarm, and a brief statement indicating its cause. The Refresh button is used to update the list with new information. A filter level Alarms only or All can be selected to restrict the view to a selection of the logs.

In some cases however, authentication is not required and it is possible to use the services without entering any PIN. Emergency calls i. Pick up the telephone handset. If the normal dial tone is heard, no PIN code is needed. This tone indicates that the voice service is activated and it is possible to make phone calls. In this case a new tone sounds indicating that the PUK is required to unblock the card.

Information Tones The Ericsson W25 generates information tones in the telephone handset, thus providing the same characteristics as the one given by the traditional fixed line network. The following table describes the nature of the unique information tones for the Ericsson W Name. Housing The Ericsson W25 is mainly intended for wall mounting and all connectors are facing downwards to allow for easy access.

The battery is available as an accessory and is facilitated within the unit. Additionally there is an internal battery charger that can recharge the battery. Power input for connecting the power supply adapter. Power adapter output: 12 VDC. Power consumption data usage: 9. A general description of each LED is provided in the table below: Table Mains powered. Battery powered. Batteries are available as an accessory to the Ericsson W25 Power is off.

Connection to a UMTS network. Connection to a GSM network. Searching for a connection. No connection to the mobile network. No error. Each Ethernet connector has two built-in indicators. The left indicator shows the speed of data traffic between the Ericsson W25 and the connected client. If the speed is Mbps, the indicator is green. When the indicator is unlit, the speed is 10 Mbps. The indicator to the right is green when a LAN connection is established and flashes to show data traffic activity.

Software is stored in flash memory. To ensure reliable operation the Ericsson W25 has dual software images stored in separate flash partitions. If a flash upgrade should be interrupted due to power failure, there is always a last known good firmware image to boot from. Data Transmission The Ericsson W25 offers both circuit switched and packet switched of data transmission. The table below summarizes typical and theoretical data rates: Theoretical Typical max data data rate rate. The ports are intended for on premises phones and should typically be connected to devices within one building.

Short loops max ohm is supported. The maximum ringing load for each port is 3 REN corresponding to three 3 old fashioned phones with mechanical bells or twenty 20 modern phones with electronic ringing. Characteristic impedance, gain, current etc of the ports are controlled by software. DTMF dialing are supported.

IEEE Table 24 - The antennas are mounted orthogonally for best performance. Appendix B Default Configuration File This appendix lists the contents of the default configuration file. Type indicates the data type of the parameter; list, boolean, integer or string. Owner indicates the owner of the parameter; U end user , O operator and R root. Group indicates which group the parameter belongs to; U end user , O Operator and R root. The 2 first positions are for the owner, position 3 and 4 are for the group and the two last positions are for others.

It is used in the implementation of WPA2. AP - Access Point An internetworking device that seamlessly connects wired and wireless networks. Access points attached to a wired network, support the creation of multiple radio cells that enable roaming throughout a facility. Association Describes the establishment and maintenance of a wireless link between devices. If security is enabled, the devices cannot do anything but exchange security credentials with this link.

See authentication. Authentication The process that occurs after association to. Authorization The process of determining what types of activities a user is permitted to undertake. Usually, authorization is in the context of authentication: once you have authenticated a user, they may be authorized for different types of access or activity.

Beacon A signal periodically transmitted from the access point that is used to identify the service set, and to maintain contact with wireless clients. Broadcast To simultaneously send the same message to multiple recipients.

The technology is fundamental to 3G mobile systems. CHAP periodically verifies the identity of the client by using a three-way handshake.

This happens at the time of establishing the initial link, and may happen again any time afterward. FXS — Foreign eXchange Station A telephone interface which provides battery power, sends dial tone, and generates ringing voltage. A standard telephone plugs into such an interface to receive telephone service.

It comprises distributed online databases that contain mappings between human-readable names and IP addresses, and servers, which provide translation services to client applications. DTMF — Dual-tone multi-frequency A signaling method used for telephone signaling over the line in the voice-frequency band to the call switching center.

Gateway A network point that acts as an entrance to another network. Page 24 5. Page 25 Configuration Wizard closes and no changes are saved.

Page 26 Available channels depend on which region that was selected in the previous step. Page Wireless Lan Authentication Configuration and Management Figure 14 — Wireless LAN: Network Name SSID page The network name is case-sensitive distinguish between uppercase and lowercase letters and can be changed to any combination of numbers 0 — 9 , letters a — z , and hyphens - with a maximum length of 32 characters.

Page 29 The WEP encrypted data can only be sent and received by users with access to a private encryption key. This means that each device on your wireless network has to be configured with the same key as the Ericsson W25 in order to allow encrypted data transmissions.

Each device on your wireless network has to be configured with the same passphrase as the Ericsson W The encryption master key is derived from the passphrase and the network name SSID of the device. It is recommended that the passphrase contains at least 20 characters. Click to proceed. Next 4. Page 33 Configuration and Management To confirm the settings and close the Configuration Wizard, click the button. If you click the button, the Configuration Wizard closes and no Cancel changes are saved.

Page Mobile Network Connection Details 4. Check with your operator for any issues related to your local coverage for both 2G and 3G. Depending on the current Internet service setup, the authentication requests may differ. The following authentication details may be required Page 38 4.

If this is the case, and an invalid SIM This information is used by the Ericsson W25 during the system selection and acquisition process, initially and when the Ericsson W25 is roaming. The following configuration options are displayed on top of the LAN page Page Dhcp Server IP address or subnet mask. For information, see section 4. To change the W25 IP address or subnet mask, type the new values in the corresponding fields and click to save the settings. Figure 29 - LAN Port Status The status for each port is either green Up when a device is connected to the port or red Down when no device is connected.

Page Region Wireless devices are thoroughly regulated and the countries have slightly different regulations. Therefore, the geographical region where the Ericsson W25 is used must be stated to make sure the correct radio frequencies are used when transmitting data.

Page 48 WLAN will now be open without any kind of security. For example, it is now possible for anyone with a computer and a wireless interface card to connect to the Ericsson W25 at any time and having access to both your home network and Internet connection. Page Connected Devices Each device on your wireless network has to be configured with exactly the same passphrase as the Ericsson W25 in order to allow encrypted data transmission.

A WPA or WPA2 passphrase is case sensitive distinguish between uppercase and lowercase letters and consists of between 8 and 63 characters. Page 50 Configuration and Management 4. Page Upnp Igd IP addresses are evaluated and a detailed packet analysis is performed. If necessary, the contents of a packet are modified and if a secondary port is required, the ALG will open one. Page Port Forwarding When a computer on the Internet sends data to the public IP address of Ericsson W25, it needs to know what to do with the data.

A port forwarding rule tells the Ericsson W25 which computer on the local area network to send the data to. The TCP protocol is used for data traffic. Page 55 Configuration and Management Figure 34 - Port forwarding example 4. If an external hub is connected, the Ericsson W25 supports connection of up to two storage devices and one printer at the same time. Page Host Name And Workgroup 4. If this page is open when you connect the device, a refresh of the page may be required for the new information to be displayed.

Page System Configuration and Management System The System page includes system information and management functions, used to update and restore the Ericsson W Page Basic System Information 4. This backup copy can then be used for restoring the configuration to a specific state. Page System Restart Click to return to the System page. The restart does not result in any configuration changes. Note: It is critical to follow the correct upgrade path or your Ericsson W25 could become inoperable.

Please check with your service provider to ensure you have the correct upgrade path. Page Factory Reset Ericsson W